● Product Features:
Ø Single component, condensation type.
Ø Room temperature fast curing.
Ø Ethyl alcohol released after curing, non-corrosive to electronic components
ØHigh adhesion to aluminum, copper, stainless steel and other metal
Ø High & low temperature resistant
Ø Fully meet the requirements of the EU ROHS
| Item |
Unit |
Typical Value |
| Color |
|
Translucent |
| Component of Basic Materials |
|
Polysiloxane |
| Density |
g/cm3 |
1.06 |
| Dry to touch |
min |
3 |
| Handing Curing Time |
min |
40 |
| Initial Curing Time |
hour |
3 |
| Full Curing Time |
hour |
24 |
| Tensile Strength |
After Curing |
1.2 Mpa |
| Elongation at break |
After Curing
25℃
|
% |
230 |
| Harness |
Shore A |
31 |
| Volume Resistivity |
Ω*cm |
1x1015 |
| Dielectric Strength |
KV/mm |
22 |
| Dielectric constant |
1.2MHz |
2.6 |
| Work Temperature |
℃ |
-60~200 |
● Main Applications:
Ø Sealing protection element connection port
Ø Bonding and sealing all kinds of home appliance
Ø sealing and anti leakage, waterproof, shockproof for appliances components
● How to Use
Ø Clean the surface: remove the rust, dust and oil etc.
Ø Glue onto the surface has been cleaned.
Ø Curing: which component was coated with adhesive and put it in the air, after that it is the curing process (At room temperature and 55% relative humidity). Adhesive curing 2 ~ 4mm depth. With the extension of time, the curing depth increasing.
● Packing:
Ø 310ml/Tube 25tubes/Carton
● Storage:
Ø Keep it away from children.
Ø Use it in ventilated places
Ø In case of contact with skins, wipe and then flush with clear water.
Ø In case of contact with eyes, flush with clear water immediately and go to hospital for checking.
Ø Store it in dry and shady places at the temperature of 8~28℃
Ø Storage life: 12 month.
Product Tags:
|
|
9333 High Performance RTV Silicone Sealant For the sealing and bonding of LCD decorative lighting and LED lights Images
|
